Spray paint drips are an annoyance for any painter, but they can be especially frustrating to fix. There are many different techniques you can use to remove them from your surface, each with its own sets of pros and cons.
In this blog post, I will share how to fix spray paint drips using 7 easy methods those work in a variety of situations! Plus I will share some tips to prevent this drips to occur in future.
How to fix spray paint drips?
While spray painting, you may suddenly notice that paint drips have started to form on your surface. If you don’t remove the drips immediately then they may begin to spread and cause additional damage.
A drip is basically a glob of paint that has begun to dry on your surface, but not completely. It is important to remove the drip as soon as possible before it can cause any further damage.
There are a few ways that you can fix spray paint drips, lets understand each of these techniques in detail so that your projects turn out perfect.
1. Remove the drip with a rag or brush:
This is the most common way to remove a drip, and it can be done with either a rag or brush. If you are using a brush, make sure that it is soft and will not damage the surface of your project.
Dip the brush into some paint thinner and then dab at the drip until it comes off. If you are using a rag, soak it in paint thinner and wipe away the drip.
Both of these methods can be effective, but they have a few drawbacks. First, they can be messy and may spread the paint thinner to other areas of your project. Second, they can take some time to remove the drip completely.
Pros: Easy to use; Can be less messy than some of the other techniques
Cons: Can spread paint thinner to other areas of your project
2. Use a razor blade:
This is another common way to remove drips and it is very effective, but this method can only be applied to remove the old dried drips of spray paint from the surface. All you need is a sharp razor blade. Take the razor blade and scrape at the drip until it comes off.
This technique is quick and easy, but there are a few downsides. First, you have to be very careful with the razor blade because you can easily damage your surface. Second, there is a chance that this technique will create additional scratches or marks on your project.
Pros: Quick and easy; Will remove all of the drips
Cons: Can cause scratching if not done carefully.
3. Use a scraper:
This is another technique that can be used to remove drips, and it is very effective. All you need is a plastic scraper or putty knife. Put the scraper in between the drip and your surface and then scrape it off.
This technique is also quick and easy, but there are a few downsides again. Since you are dealing with a scraper or knife you can easily damage your surface, so you need to be very careful. Second, if there is any paint on the scraper, then it can spread to other areas of your project too.
4. Use a heat gun:
A heat gun is a great tool for fixing spray paint drip problems. You can use the heat from your gun to dry up and shrink excess paints in a few minutes. Heating the paint also helps it to bond with the surface better.
Be careful when using a heat gun, as you can easily damage the surface if you are not careful. Make sure to keep a safe distance and always test your heat gun on an inconspicuous area before starting work. Excessive heat can also cause damage to your paint.
5. Use a hair dryer:
You can also use a hair dryer to fix spray paint drips. The heat and air from the dryer will help to shrink the paint and make it less likely to drip.
Just like with the heat gun, be careful not to damage the surface with too much heat. Test your hairdryer on a small hidden area first to make sure it won’t cause any damage.
A hairdryer can also be used for removing paint drips from textured surfaces, but you might need to use an abrasive cleaning pad or sandpaper along with your hairdryer.
Also read: How to unclog a spray paint can
6. Apply light sanding:
If your paint is not too fresh, you can use a fine sandpaper to lightly rub on the surface of the drips. This will help to get rid of the excess paint and give it a smoother look.
Remember that you should only use this method if your paint is still fresh enough, otherwise you might need to start all over again!
7. Use a foam and some water:
If some paint drips down on your surface and you don’t notice it until the paint is dry, this method can help. Just use a foam and some warm water to wet the dried paint droplets. Once the paint is softened, you can rub it off with your fingers or a cloth.
This method might not work as well if the paint has been dry for too long or if the surface is very textured. But, it’s worth a try if you don’t have any other options.
These are the seven ways to fix spray paint drips and hopefully one of these methods will work for you! But, with careful planning and some practice, you can avoid this altogether and get beautiful results.
How to prevent Spray Paint Drips to occur:
There are a few things you can do to help prevent spray paint drips in the first place.
1. Always choose high-quality spray paints:
Always make sure you use a high-quality spray paint. This will provide the best results and prevent any possible damage to your surface.
Check out our article on how to choose quality spray paints for more information! It also talks about brands that are known for making great products, which is an excellent resource if you’re looking into buying some new paint supplies.
Also, pay attention to the weather when you’re about to spray your surface! It might be helpful if it’s not too windy outside or if there are no strong gusts of wind along with sudden temperature changes.
2. Hold the spray paint can 6 to 8 inches away:
Another way to help prevent drips is to hold the spray paint can at least six inches away from the surface. This will give you a wider spraying area and reduce the chances of any drips.
Holding the can right in front of the surface causes the paint to build up and drip down. Experiment with different distances until you find what works best for you, but keep the distance at least six inches.
Also, don’t forget to shake the can well before spraying! This will help mix the paint and make it easier to apply.
Also read: Why Do Graffiti Artists Use Spray Paint?
3. Keep the spray paint can moving continuously:
It is very important to keep the spray paint can moving continuously while you’re spraying. This will help to avoid drips and give you a more even coat of paint.
Pausing between strokes can cause the paint to build up and drip down, so it’s best to move the can steadily back and forth.
If you’re having trouble getting the paint to come out evenly, try tilting the can slightly while spraying. This will help the paint come out in a more controlled manner.
4. Apply several thin coats:
Another way to help prevent paint drips is to apply several thin coats of spray paint, instead of one thick coat. This will allow the layers underneath to dry up and avoid any excess wetness on your surface.
This also helps you cut down on drying time so your project can be finished faster! So try applying three or four light coats with a few minutes of drying time in between.
This is especially important if you’re using a metallic spray paint, which can be more prone to drips.
Try these tips and you’ll be less likely to have any drips! But, if you already have got some drips, use one of the above methods to fix them.
What causes spray paint to drip?
Spray paint drips can be caused by a couple of different things.
First, you might not have shaken the spray can well enough before using it. Shake your cans for at least one minute to mix up all of the ingredients and make sure they’re properly combined. This will help prevent any problems from happening while you’re using the can.
Also, some paints are more prone to dripping than others. It is recommended to use only high-quality spray paints for the best results. Pay attention to any warning labels on your paint can and follow their instructions carefully.
You might also want to try out different methods of spraying, depending on what type of surface you’re working with or how much time you have before it dries up!
If you’re having problems with spray paint drips, give one of these methods a try. With a little patience and practice, you’ll be able to fix the drip and get on with your project. And, remember to always follow the preventive methods mentioned in this article to avoid any spray paint drips in the future!
What can I do if the paint drips down my arm?
If you get some spray paint on your skin, quickly wash it off with soap and water. Don’t use any solvents or harsh chemicals to try to remove the paint, as this could damage your skin.
Can I fix a large drip on my project?
If the drip is big and noticeable, you might have to repaint that area. Try using a smaller brush or a foam brush to get into tight spaces and fix the drip.
How to fix spray paint runs on metal?
Spray paint runs on metal can usually be fixed with some sanding.
How to fix spray paint drips on glass?
Spray paint drips can be easily repaired on glass with some standard window cleaner. Just spray the area and let it dry, then go over it with a paper towel or cloth to remove any excess paint.
How to fix spray paint drips on plastic?
If you’re having trouble fixing spray paint drips on plastic, try using a wet cloth to wipe it off gently.
How to fix spray paint drips on wood?
If the spray paint drips on wood, you can usually fix it by using a brush along with some paint thinner. Dip the brush in the thinner and then scrub at the drip until it’s gone. Allow the surface to dry completely before continuing with your project.